Forums Modeling Technical Modeling
  • Topic: 3d printed 40' Intermodal container

    Back To Topics
    (0 rates)
    • October 7, 2019 3:30 PM EDT
      • West Glocester, Rhode Island
         
      • Posts
        594
      • Thanks
        170
      • Thanked
        244

      3d printed 40' Intermodal container

      A guy on Thingiverse designed a European flat and I really liked his container so I've re-scaled it for 1:29.  https://www.thingiverse.com/thing:3894100

      So now I can make 40' containers for about $9.50 each!   Downside is it takes 43 hours and 17 mins to print one!  I plan on making a stack of them so I will only need the outside faces.

       

      ____________________________________

      Thingiverse Icon Instagram Icon

    • October 7, 2019 4:05 PM EDT
      • Nashville, IL
         
      • Posts
        5,297
      • Thanks
        582
      • Thanked
        393

      Looks great, Dan..  Using the outside faces for stacks should be cost and time effective..    

    • October 7, 2019 4:34 PM EDT
      • Pittsburgh, Pennsylvania
         
      • Posts
        11,131
      • Thanks
        127
      • Thanked
        919

      Almost 2 days for a container? Gee.......

      ____________________________________

      Shannon car Shops
      Home of the infamous leg lamp

      I.A.R.R.R. Member #12

      and King Butt Modeler

    • October 7, 2019 5:25 PM EDT
      • West Glocester, Rhode Island
         
      • Posts
        594
      • Thanks
        170
      • Thanked
        244

      David Maynard said:

      Almost 2 days for a container? Gee.......

      I could probably cut that down a bit but for good bed adhesion and quality I'm printing at 40mm/s.  Of course it's not really taking MY time as I am sleeping, working etc. while it prints.

      ____________________________________

      Thingiverse Icon Instagram Icon

    • October 7, 2019 8:14 PM EDT
      • Peoria, NW of Phoenix, Arizona
         
      • Posts
        1,562
      • Thanks
        287
      • Thanked
        366

      are you going to be selling them?

       

       

      ____________________________________

       

      Butt Modeler #2

       

       

    • October 7, 2019 9:37 PM EDT
      • Waverly, Alabama
         
      • Posts
        2,021
      • Thanks
        786
      • Thanked
        793

      Effective use of 3D printing, Dan.  Especially looking at the prices of commercially available containers. 

      ____________________________________

       

    • October 7, 2019 10:37 PM EDT
      • Charlottesville, Virginia
         
      • Posts
        394
      • Thanks
        7
      • Thanked
        67

      Very nice. Print once, cast in resin perhaps?

    • October 7, 2019 10:37 PM EDT
      • West Glocester, Rhode Island
         
      • Posts
        594
      • Thanks
        170
      • Thanked
        244

      Pete Lassen said:

      are you going to be selling them?

      I currently don't sell any of my designs.  I just share them for anyone who has a 3d printer.  I've enable the printing apps on the Thingiverse page so you can get a 3rd party to print the parts for you.  Just click "Order this printed" and choose a service.  I would recommend Treatstock as you may be able to find someone close by and save on shipping.   Make sure you order the correct amount of each part.

      Dan Hilyer said:

      Effective use of 3D printing, Dan.  Especially looking at the prices of commercially available containers. 

      I've been looking to do this for a long time.  My original idea was to just print the ends and mill the sides and roof from PVC sheet with my 90% built CNC.  This will do for now.

      ____________________________________

      Thingiverse Icon Instagram Icon

    • October 8, 2019 12:07 AM EDT
      • F'n Fresno, California
         
      • Posts
        34
      • Thanks
        33
      • Thanked
        13

      Dan, Very nice print and paint job. I'm amazed how well the rods came out! Definitely difficult to accomplish.

      Are you printing at 0.08mm or finer? You really have your machine dialed in!

      John R.

    • October 8, 2019 8:15 AM EDT
      • Easton , Massachusetts
         
      • Posts
        4,638
      • Thanks
        2,266
      • Thanked
        648

      Is the green your filament … could you print with diff colors so you would only have to paint details ?

      ____________________________________

       My u-tube  My Vimeo

      The light in the tunnel might not be an engine , but a light in the caboose of my own train on my Roundy Round Rail Road !    My empire is complete...I think...

    • October 8, 2019 10:36 AM EDT
      • West Glocester, Rhode Island
         
      • Posts
        594
      • Thanks
        170
      • Thanked
        244

      John Ray said:

      Dan, Very nice print and paint job. I'm amazed how well the rods came out! Definitely difficult to accomplish.

      Are you printing at 0.08mm or finer? You really have your machine dialed in!

      John R.

      The Doors and frames .1mm.  Everything else is .2mm  using a .4mm nozzle.  The model has not been painted yet.  It's just matte green filament.

      ____________________________________

      Thingiverse Icon Instagram Icon

    • October 8, 2019 10:46 AM EDT
      • West Glocester, Rhode Island
         
      • Posts
        594
      • Thanks
        170
      • Thanked
        244

      Sean McGillicuddy said:

      Is the green your filament … could you print with diff colors so you would only have to paint details ?

      Yes Sean, the green is just filament.  I'm sure I could get away with not painting but they should be painted for UV protection anyway.  They will certainly need weathering.

       

      ____________________________________

      Thingiverse Icon Instagram Icon

    • October 8, 2019 3:29 PM EDT
      • Pittsburgh, Pennsylvania
         
      • Posts
        11,131
      • Thanks
        127
      • Thanked
        919

      Unpainted plastic usually glows in bright light. So paint is rather necessary to make the model opaque. I don't know about your printed containers, maybe that plastic doesn't glow, but most plastic does.

      ____________________________________

      Shannon car Shops
      Home of the infamous leg lamp

      I.A.R.R.R. Member #12

      and King Butt Modeler

    • April 20, 2020 8:38 AM EDT
      • Los Angeles, California
         
      • Posts
        7
      • Thanks
        3
      • Thanked
        2

      I've just downloaded your model. I will print it on my Creality Ender-3 Pro asap.

      What 3d printer are you currently using? Do you mind sharing your printing settings?

      Anyway, thanks for sharing your files for free.

    • April 20, 2020 11:02 AM EDT
      • West Glocester, Rhode Island
         
      • Posts
        594
      • Thanks
        170
      • Thanked
        244

      Joel Sheppard said:

      I've just downloaded your model. I will print it on my Creality Ender-3 Pro asap.

      What 3d printer are you currently using? Do you mind sharing your printing settings?

      Anyway, thanks for sharing your files for free.

      Joel,  My printer and setting info is all noted on the Thingiverse page https://www.thingiverse.com/thing:3894100

      Thanks and You're welcome!

      This post was edited by Dan Gilchrist at April 30, 2020 2:14 PM EDT
      ____________________________________

      Thingiverse Icon Instagram Icon

    • April 30, 2020 2:15 PM EDT
      • Los Angeles, California
         
      • Posts
        7
      • Thanks
        3
      • Thanked
        2

      Sorry, I haven't noticed them (now I see that they are clearly visible in the content box). Thanks again :)

Forums Modeling Technical Modeling

    Icon Legend

  • Topic has replies
    Hot topic
    Topic unread
    Topic doesn't have any replies
    Closed topic
    BBCode  is enabled
    HTML  is enabled

Add Reputation

Do you want to add reputation for this user by this post?

or cancel

Ads by Google